10 µl Finn Style Filter Tips

10 µl Finn Style Filter Tips | BT10F | NEPTUNE

Series: BT10F Series 10 µl FinnTM Style Barrier Tip

Part Number: BT10F

Graduation Marks: Indicated at 10 µl location

Tip Composition: Neptune pipette tips are made of virgin polypropylene

Tip Type: S³ - Low Retention

Filter Material: High Density Polyethlene Filter

Offered in Sterile Format: Yes

Configuration: Racked

Packaging Breakdown: 96 tips/ rack | 10 racks/ pack | 5 packs/ case

Autoclavable: No

Storage Condition: Store in a clean, dry environment at room temperature 15-30˚C

QUALITY CONTROL

Certificates of Compliance: Each lot undergoes stringent inspection and indiviadual lot testing ensures Neptune products are certified RNase, DNase, DNA and Endotoxin-free. Visit www.neptunescienfific.com to obtain a copy of a certificate of compliance for your Neptune product.

RNase/ DNase: Products are washed in distilled water and concentrated via centrifugation. Samples are added to previously established nucleic acid standards, incubated for one hour at 37°C, and tested on a 2% gel using electrophoresis. Products
must show no degradation of standards to pass. Test sensitivity is 10-7 Kunitz units/µl.

Nucleic Acid: Products are washed in distilled water and concentrated via centrifugation. Then, samples are added to protocol specified PCR reactions and thermal cycled for 50 cycles. A 2% agarose gel electrophoresis is used to examine experimental
samples, positive controls, and negative controls. To pass, product samples must show no DNA amplification. Test
sensitivity is 10 ng.

Endotoxin/ Pyrogen: Products are tested for endotoxins by using the Limulus Amebocyte Lysate (LAL) gel assay according to FDA guidelines. Test sensitivity is 0.06 EU/ml.

Sterilization: Products are sterilized using electron beam irradiation.

Traceability: Each product contains a 5 digit lot number located on the rack, pack and case of each finished good. With Nep-tune’s advanced manufacturing process all raw materials are able to be traced for maximum quality assurance.

ADVANCEMENTS IN LIQUID HANDLING

S³: Neptune’s exclusive S³ polymer was designed to increase pipetting accuracy by virtually eliminating tip retention and
sample hold-up.

ESP Reload: Neptune’s ESP (Environmental Sustainable Pack) was the industry’s first pipette reload system designed to minimize plastic waste by 90% and provide an environmentally friendly solution.

Aerosol Barrier Tip: Specifically enginerred to reduce cross contamination.

PIPETTOR COMPATIBILITY

Biohit™ M100 and M200

Biohit Proline Plus™ 100 µl and 200 µl

Brand Transferpette S™ 20 µl, 100 µl and 200 µl

Brand Transferpette Electronic™ 300 µl

Capp™ 50 µl, 100 µl, and 300 µl

CLP Beta-Pette™ 20 µl, 100 ul and 200 µl

CLP Poseidon™ 50 µl, 100 µl, 200 µl and 300 µl

CLP Poseidon Electronic™ 200 µl

Eppendorf Reference™ 20 µl, 100 µl and 200 µl

Eppendorf Research™ 20 µl, 100 µl,

200 µl and 300 µl

Eppendorf Research Plus™ 20 µl and 100 µl

Eppendorf Xplorer™ 20 µl and 100 µl

Finnpipette™ 20 µl, 50 µl, 200 µl and 300 µl

Finnpipette™ Electronic 300 µl

Gilson Pipetman™ P20, P100 and P200

Gilson Pipetman Ultra™ U20 and U200

Hamilton™ 25 µl, 100 µl and 300 µl

Nichiryo Nichipet EX™ 20 µl, 100 µl and 200 µl

Nichiryo Oxford Benchmate™ 20 µl

Nichiryo Oxford Multimate™ 50 µl and 300 µl

Socorex Calibri 822™ 100 µl and 200 µl

VWR Ergonomic High Performance™ 20 µl and 200 µl

VWR Ultra High Performance™ 20 µl, 100 µl and 200 µl