10 µl Finn Style Filter Tips
- Pre-Sterile, Racked
- 10 Racks of 96/Pack
10 µl Finn Style Filter Tips | BT10F | NEPTUNE
Series: BT10F Series 10 µl FinnTM Style Barrier Tip
Part Number: BT10F
Graduation Marks: Indicated at 10 µl location
Tip Composition: Neptune pipette tips are made of virgin polypropylene
Tip Type: S3 - Low Retention
Filter Material: High Density Polyethlene Filter
Offered in Sterile Format: Yes
Packaging Breakdown: 96 tips/ rack | 10 racks/ pack | 5 packs/ case
Storage Condition: Store in a clean, dry environment at room temperature 15-30˚C
Certificates of Compliance: Each lot undergoes stringent inspection and indiviadual lot testing ensures Neptune products are certified RNase, DNase, DNA and Endotoxin-free. Visit www.neptunescienfific.com to obtain a copy of a certificate of compliance for your Neptune product.
RNase/ DNase: Products are washed in distilled water and concentrated via centrifugation. Samples are added to previously established nucleic acid standards, incubated for one hour at 37°C, and tested on a 2% gel using electrophoresis. Products
must show no degradation of standards to pass. Test sensitivity is 10-7 Kunitz units/µl.
Nucleic Acid: Products are washed in distilled water and concentrated via centrifugation. Then, samples are added to protocol specified PCR reactions and thermal cycled for 50 cycles. A 2% agarose gel electrophoresis is used to examine experimental
samples, positive controls, and negative controls. To pass, product samples must show no DNA amplification. Test
sensitivity is 10 ng.
Endotoxin/ Pyrogen: Products are tested for endotoxins by using the Limulus Amebocyte Lysate (LAL) gel assay according to FDA guidelines. Test sensitivity is 0.06 EU/ml.
Sterilization: Products are sterilized using electron beam irradiation.
Traceability: Each product contains a 5 digit lot number located on the rack, pack and case of each finished good. With Nep-tune’s advanced manufacturing process all raw materials are able to be traced for maximum quality assurance.
ADVANCEMENTS IN LIQUID HANDLING
S3: Neptune’s exclusive S3 polymer was designed to increase pipetting accuracy by virtually eliminating tip retention and
ESP Reload: Neptune’s ESP (Environmental Sustainable Pack) was the industry’s first pipette reload system designed to minimize plastic waste by 90% and provide an environmentally friendly solution.
Aerosol Barrier Tip: Specifically enginerred to reduce cross contamination.
Biohit™ M100 and M200
Biohit Proline Plus™ 100 µl and 200 µl
Brand Transferpette S™ 20 µl, 100 µl and 200 µl
Brand Transferpette Electronic™ 300 µl
Capp™ 50 µl, 100 µl, and 300 µl
CLP Beta-Pette™ 20 µl, 100 ul and 200 µl
CLP Poseidon™ 50 µl, 100 µl, 200 µl and 300 µl
CLP Poseidon Electronic™ 200 µl
Eppendorf Reference™ 20 µl, 100 µl and 200 µl
Eppendorf Research™ 20 µl, 100 µl,
200 µl and 300 µl
Eppendorf Research Plus™ 20 µl and 100 µl
Eppendorf Xplorer™ 20 µl and 100 µl
Finnpipette™ 20 µl, 50 µl, 200 µl and 300 µl
Finnpipette™ Electronic 300 µl
Gilson Pipetman™ P20, P100 and P200
Gilson Pipetman Ultra™ U20 and U200
Hamilton™ 25 µl, 100 µl and 300 µl
Nichiryo Nichipet EX™ 20 µl, 100 µl and 200 µl
Nichiryo Oxford Benchmate™ 20 µl
Nichiryo Oxford Multimate™ 50 µl and 300 µl
Socorex Calibri 822™ 100 µl and 200 µl
VWR Ergonomic High Performance™ 20 µl and 200 µl
VWR Ultra High Performance™ 20 µl, 100 µl and 200 µl