1000 µl Filter Tips
- Pre-Sterile, Racked
- 10 Racks of 96/Pack
1000 µl Filter Tips | BT1000 | NEPTUNE
Series: BT1000 Series 1000 µl Barrier Tip
Part Number: BT1000.96 - BT1000.96.N
Graduation Marks: Graduation marks are indicated at both 10 µl, 50 µl and 100 µl locations Refer to product image for visuals
Tip Composition: Neptune pipette tips are made of virgin polypropylene
Tip Type: Natural Polypropylene and S3 - Low Retention
Filter Material: High Density Polyethlene Filter
Offered in Sterile Format: Yes
Packaging Breakdown: 96 tips/ rack | 8 racks/ pack | 4 packs/ case
Storage Condition: Store in a clean, dry environment at room temperature 15-30˚C
Certificates of Compliance: Each lot undergoes stringent inspection and indiviadual lot testing ensures Neptune products are certified RNase, DNase, DNA and Endotoxin-free. Visit www.neptunescienfific.com to obtain a copy of a certificate of compliance for your Neptune product.
RNase/ DNase: Products are washed in distilled water and concentrated via centrifugation. Samples are added to previously established nucleic acid standards, incubated for one hour at 37°C, and tested on a 2% gel using electrophoresis. Products
must show no degradation of standards to pass. Test sensitivity is 10-7 Kunitz units/µl.
Nucleic Acid: Products are washed in distilled water and concentrated via centrifugation. Then, samples are added to protocol specified PCR reactions and thermal cycled for 50 cycles. A 2% agarose gel electrophoresis is used to examine experimental
samples, positive controls, and negative controls. To pass, product samples must show no DNA amplification. Test
sensitivity is 10 ng.
Endotoxin/ Pyrogen: Products are tested for endotoxins by using the Limulus Amebocyte Lysate (LAL) gel assay according to FDA guidelines. Test sensitivity is 0.06 EU/ml.
Sterilization: Products are sterilized using electron beam irradiation.
Traceability: Each product contains a 5 digit lot number located on the rack, pack and case of each finished good. With Nep-tune’s advanced manufacturing process all raw materials are able to be traced for maximum quality assurance.
ADVANCEMENTS IN LIQUID HANDLING
S3: Neptune’s exclusive S3 polymer was designed to increase pipetting accuracy by virtually eliminating tip retention and
ESP Reload: Neptune’s ESP (Environmental Sustainable Pack) was the industry’s first pipette reload system designed to minimize plastic waste by 90% and provide an environmentally friendly solution.
Aerosol Barrier Tip: Specifically enginerred to reduce cross contamination.
Biohit Proline™ 1000 µl
Brand Transferpette™ 1000 µl
CLP Beta-Pette™ 1000 µl
CLP Poseidon™ 1000 µl
CLP Poseidon Electronic™ 1000 µl
Eppendorf Reference™ 1000 µl
Eppendorf Research™ 1000µl
Eppendorf Research Plus™ 1000 µl
Eppendorf Xplorer™ 1000 µl
Finnpipette™ 1000 µl and 1200 µl
Gilson Pipetman™ P1000
Hamilton™ 1000 µl
Labnet BioPette E™ 1200 µl
Nichiryo Nichipet EX™ 1000 µl
Socorex Calibri 822™ 1000 µl
VWR Ergonomic High Performance™ 1000 µl
VWR Ultra High Performance™ 1000 µl